[#5841] A8X LPro Magic Hello Bypass iOS 15 without network ( Air2 Wi-Fi supported ) [USDT ONLY]

🚀 NEW UPDATE: NO DCSD REQUIRED for A10/A11 Devices

🔹 No DCSD Needed for iPhone 7-X (A10/A11)
🔹 DCSD Required for iPads & iPhone 6s / 6s Plus

📌 AUTO METHOD

1️⃣ Connect Device in Recovery Mode
2️⃣ Click "Boot to DFU Mode" (DO NOT SKIP)
3️⃣ Click "Purple Mode"

• After a successful write, the device enters Recovery Mode
  4️⃣ Click "Boot to DFU Mode" (DO NOT SKIP)
  5️⃣ Click "Run PwnDFU"
  6️⃣ Click "Boot Device"
  7️⃣ Click "Check SSH" (Wait for Check SSH ✔️)
  8️⃣ Click "HELLO BYPASS"
• ✅ Device will turn on and be Successfully Activated

📌 MANUAL METHOD

1️⃣ Connect Device in Normal Mode (Shows Serial to Change Manually)
2️⃣ Connect Device in Recovery Mode
3️⃣ Click "Boot to DFU Mode" (DO NOT SKIP)
4️⃣ Click "Purple Mode"

• Connect DCSD Cable for manual methods
  5️⃣ Open MagicCFG (or any tool to edit Serial)
  6️⃣ Verify Serial Change (Check device info in Normal Mode)
  7️⃣ Click "Hello Bypass" in Normal Mode (DO NOT SKIP)
• ✅ Ensures data is OK for bypass
  8️⃣ Connect Device in Recovery Mode
  9️⃣ Click "Boot to DFU Mode" (DO NOT SKIP)
  🔟 Click "Run PwnDFU"
  1️⃣1️⃣ Click "Boot Device"
  1️⃣2️⃣ Click "Check SSH" (Wait for Check SSH ✔️)
  1️⃣3️⃣ Click "HELLO BYPASS"

📌 LPro Magic Hello – iOS 15 Bypass

🔹 Supports iCloud Login & App Store
🔹 DCSD Cable Required

📌 Step-by-Step Guide

1️⃣ Enter DFU Mode
2️⃣ Click "Preload PwnDFU"
3️⃣ Click "Preload Device" (Device Screen Turns Purple)

• Switch to DCSD Cable at this stage
  4️⃣ Click "Preload Check" (Device will restart automatically)
  5️⃣ Enter DFU Mode Again
  6️⃣ Click "Run PwnDFU"
  7️⃣ Click "Boot Device"
  8️⃣ Click "Check SSH" (Wait for Check SSH ✔️)
  9️⃣ Click "Activation Device"
• ✅ Device will turn on and be Successfully Activated

📌 ALTERNATIVE METHOD

1️⃣ Manually Change Serial Number (Provided by Us)
2️⃣ Restart Device
3️⃣ Click "Preload Check" (Device restarts to enter DFU Mode)
4️⃣ Continue Activation Steps:

• Run PwnDFU
• Boot Device
• Check SSH (Wait for Check SSH ✔️)
• Activate Device
• ✅ Device will turn on and be Successfully Activated

📌 Note: Notifications may not work on some iPhones. This will be improved in future updates.

🔗 TOOL LINK: Download Here 🚀